User's Manual

WAN PTM ConnectionsNetwork
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
6-13
............................................................................................................................................................................................................................................................
Figure 6-7 Bridge Mode settings window with Port Based binding
Table 6-7 describes the fields of the Bridge Mode setting window with Port Based
binding.
Table 6-7 Field descriptions
Fields Description
LAN Binding Select LAN port, HPNA(Only for 6Vz.A4111) port and WLAN port
to bind the connection.
WA N
Untagged Select this option if VLAN ID is not being used.
Always Use ID Select this option if VLAN ID is used and enter the VLAN ID
number (between 2 and 4094)
QoS Queue Enter a queue number (0 to 7) to assign to the incoming traffic.
CoS Remarking Enable New Cos Value to assign CoS (class of service) for
incoming traffic.
IP Address Enter the given IP address for your connection.
NetMask Enter the subnet mask for your connection.
Save Click to save your setting.