User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
............................................................................................................................................................................................................................................................
WAN PTM ConnectionsNetwork
6-12
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Bridge
If you select Bridge as the mode in the WAN PTM Connections window, the Bridge
settings window with Port based binding opens; see Figure 6-7.
Password Enter the password for the PPPoE connection.If you are not sure,
please consult with your ISP for more information.
Access Concentrator The access concentrator is optional. Please consult with your ISP
for information.
Service Name The service name is optional. Please consult with your ISP for
information.
Mode
Connect on demand:
Max idle time
Select this option to let the gateway connect to Internet only when
your trying to access it. If there are no activities in the specified
period (Max idle time), the gateway will disconnect the connection.
Always on Select this option to let the gateway always connected to the
Internet.
Manual Select and then click Connect to manually connect the router to
the Internet. Click Disconnect to disconnect the connection.
Options
Authentication Mode Select the authentication mode from the drop-down menu. Options
include:
• CHAP + PAP
• Only MS-CHAP
• Only CHAP
• Only PAP
This is optional. Your ISP will provide this information if it is
necessary.
MTU (bytes) Select Auto to set the maximum transfer unit to the default (1492),
or enable Manual to manually enter a value.
Next Click to go to next step.
Back Click to go back to previous page.
Activate WAN Settings Click to activate the connection.
Delete All Click to remove all WAN connections.
Edit Click to modify a specific connection.
Delete Click to remove a specific connection.
Fields Description