User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
WAN PTM ConnectionsNetwork
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
6-11
............................................................................................................................................................................................................................................................
Figure 6-6 PPPoE Mode settings window with Port Based Binding
Table 6-6 describes the fields of PPPoE Mode setting window with Port Based Binding.
Table 6-6 Field descriptions
Fields Description
LAN Binding Select LAN port, HPNA(Only for 6Vz.A4111) port and WLAN port
to bind the connection.
WA N
Untagged Select this option if VLAN ID is not being used.
Always use ID Select this option if VLAN ID is used and enter the VLAN ID
number (between 2 and 4094)
User Name Enter the user name for the PPPoE connection.If you are not sure,
please consult with your ISP for more information.