User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
WAN PTM ConnectionsNetwork
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
6-9
............................................................................................................................................................................................................................................................
Figure 6-5 DHCP settings window with Port Based Binding
Table 6-5 describes the fields of the DHCP Mode setting window with Port Based
Binding.
Table 6-5 Field descriptions
Field Description
LAN Binding Select LAN port, HPNA(Only for 6Vz.A4111) port
and WLAN port to bind the connection.
WA N
Untagged Select this option if VLAN ID is not being used.
Always Use ID Select this option if VLAN ID is used and enter the
VLAN ID number (between 2 and 4094)
802.1x Select Enable to enable 802.1x, or select Disable to
disable 802.1x. Please consult with your ISP for
more information.
DHCP Options