User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
............................................................................................................................................................................................................................................................
WAN PTM ConnectionsNetwork
6-8
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
DHCP
If you select DHCP as the mode in the WAN PTM Connections window, the DHCP settings
window with Port based binding opens; see Figure 6-5.
Options
MTU Select Auto to set the maximum transfer unit to the
default (1500), or select Manual to manually enter a
value.
Next Click to go to next step.
Back Click to go back to previous page.
Activate WAN Settings Click to activate the connection.
Delete All Click to remove all WAN connections.
Edit Click to modify a specific connection.
Delete Click to remove a specific connection.
Field Description