User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
WAN PTM ConnectionsNetwork
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
6-7
............................................................................................................................................................................................................................................................
Figure 6-4 Static IP settings window with Port Based Binding
Table 6-4 describes the fields of the Static IP setting window with Port Based Binding.
Table 6-4 Field descriptions
Field Description
LAN Binding Select Lan port, HPNA (Only for 6Vz.A4111) port
and WLAN port to bind the connection.
Wan
Untagged Select this option if VLAN ID is not being used.
Always Use ID Select this option if VLAN ID is used and enter the
VLAN ID number (between 2 and 4094)
IP Address Enter the IP address provided by your ISP.
NetMask Enter the subnet mask provided by your ISP.
Gateway Enter the gateway’s IP address provided by your
ISP.
DNS1/2/3 Enter the DNS IP address. They are optional.