User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
WAN PTM ConnectionsNetwork
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
6-5
............................................................................................................................................................................................................................................................
Select WAN PTM Connections in the Network menu to access the WAN PTM
Connections window; see Figure 6-3.
Figure 6-3 WAN PTM Connections window
Table 6-3 describes the fields of the WAN PTM Connection window.
Table 6-3 Field descriptions
Field Description
Interface Name Enter an appropriate name for your new connection.
Mode Click the drop-down menu and select either Static
IP, DHCP, PPPoE, or Bridge as the connection
type.
Binding
Port Based Bind the interface by LAN or WLAN port
MAC Based Bind the interface by physical MAC address
No LAN/WLAN Binding The interface does not bind to any Port or MAC
Local Service
VoIP Provide VoIP service to be used.