User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
i
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
About this document
Purpose
This document provides information on the hardware setup, software configuration, and
administration necessary to operate the CellPipe 7130 Residential Gateway 6Ve.A4111
and 6Vz.A4111. The 6Vz.A4111 supports HPNA; 6Ve.A4111 does not.
Reason for revision
The following table shows the revision history of this document.
Intended audience
This document is intended for users and administrators of the CellPipe 7130 RG
6Ve.A4111 and 6Vz.A4111.
How to use this document
This document introduces the CellPipe 7130 RG 6Ve.A4111 and 6Vz.A4111 hardware,
connections, and setup. It also covers the Web configuration interface and provides
parameter definitions for the fields on those screens.
Structure of hazard statements
Overview
For the safety of you and your equipment, this document contains hazard statements.
Hazard statements are given at points where there may be a risk of damage to personnel,
equipment, or operation. Failure to follow the directions in a hazard statement may result
in personal harm, equipment damage, or network loss.
General structure
Hazard statements include the structural elements shown in the figure below.
Revision Date Reason for reissue
Edition 01 February 2011 First release of this document