User's Manual

............................................................................................................................................................................................................................................................
File sharingUSB Service
13-2
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Note: The address 192.168.2.1 is your LAN management IP. It can be changed by
user configuration.
........................................................................................................................................................
E ND OF STEPS
Mac OS
1. Plug the USB storage device into the CellPipe 7130 RG USB port.
2. Open a browser.
3. Enter smb://192.168.2.1/ and press .
Note: The address 192.168.2.1 is your LAN management IP. It can be changed by
user configuration.
........................................................................................................................................................
E ND OF STEPS
Access the USB device by setting a Network device
The following procedures explain how to access the USB device by setting a Network
device using Windows or Mac OS.
Windows
1. Plug the USB storage device into the CellPipe 7130 RG USB port.
2. Open Window Network Neighborhood.
3. Create a new network device by adding \\192.168.2.1.
Note: The default address of your LAN management IP is 192.168.2.1. If you have
changed the IP address, enter it instead.
4. Access the USB device by clicking on the newly created network device; see
Figure 13-1.