User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
............................................................................................................................................................................................................................................................
802.1x CA UploadUtilities
11-10
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Figure 11-7 Connection Test window
Table 11-6 describes the fields of the Connection Test window.
Table 11-6 Field descriptions
802.1x CA Upload
The 802.1x CA upload enables you to upload 802.1x CA certificate. If you enabled a
DHCP WAN connection with 802.1x enabled.Then you can use this Utility to uploaded a
CA that will be used to authenticate with your ISP and get DHCP service.
Select 802.1x CA Upload in the Utilities menu to access the 802.1x CA Upload window;
see Figure 11-8.
Field Description
Interface From the drop-down menu, select a connection to
test if the connection is working properly.
Host Please enter an IP address to test the connection.
Start Ping Click Start Ping to test the connection.
Start HPNA Ping (Only for 6Vz.A4111) Click Start HPANA Ping to test the connection by
HPNA.