User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
Management Access ControlUtilities
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
11-7
............................................................................................................................................................................................................................................................
Management Access Control
The Management Access Control window enables you to control who can access the
service provided by the gateway.
Note: It is recommended that you consult your ISP before configuring the access.
Select Management Access Control in the Utilities menu to access the Management
Access window; see Figure 11-5.
Figure 11-5 Management Access Control window
Table 11-4 describes the fields of the Management Access window.
Table 11-4 Field descriptions
Field Description
HTTP Access to Gateway
Telnet Access to Gateway
SSH Access to Gateway
TFTP Access to Gateway
Select one of the following settings:
• Disable
• From LAN only
• From WAN only
• From LAN and WAN
WAN Ping Reply Select Enable to allow the WAN interface to
respond to the ICMP request from the Internet.
Select Disable to deny the WAN interface from
responding to the ICMP request from the Internet.