User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
............................................................................................................................................................................................................................................................
System SettingUtilities
11-4
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Table 11-2 Field descriptions
System Setting
The System Setting window enables you to change the web administrator username and
password, and configure settings such as the time zone, NTP, and daylight savings.
Note: It is highly recommended that you change the administrator’s default
username and password and the Telnet default username and password for telnet.
Select System Setting in the Utilities menu to access the System Setting window; see
Figure 11-4.
Field Description
Update Firmware Click Browse to locate and select the firmware
upgrade file to upload.
Note: Firmware upgrades are available at
http://www.alcatel-lucent.com/wps/portal/support.
You must obtain the upgrade file before uploading.
Upload Firmware Click to upload the firmware update.