User's Manual

QoS MACQoS PTM Setup
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
10-13
............................................................................................................................................................................................................................................................
QoS MAC
The QoS MAC window enables you to configure QoS policy for specific device by MAC
address when the gateway is operating in bridge mode.
Select QoS MAC in the QoS Setup menu to access the QoS MAC window; see Figure 10-7.
New Tos Value Select New Tos Value and enter a queue number (0 to 7) to assign to the
incoming traffic.
New DSCP Value Select New DSCP Value and enter a DSCP value (0 to 63).
Keep Cos value Select Keep CoS value to retain the original value.
New Cos Value Select New Cos Value to set a new CoS (class of service) value for
incoming traffic.
Align Cos with
Tos Value
Select Align Cos with Tos value to assign CoS (class of service) as Tos
value for incoming traffic.
Interface Name The Interface name of WAN connection to configure its QoS policy.
QoS
Classification
The classification of this QoS rule:
• Original Tos Tag - assign the queue according to the incoming
traffic’s Tos value.
• Specified Queue - incoming traffic will be queued in the specific
queue (0 to 7).
TOS/DSCP
Setting
TOS/DSCP marking setting for incoming traffic.
CoS Setting Cos (class of service) setting of this QoS rule.
Apply Changes Click to save your changes.
Field Description