User's Manual

............................................................................................................................................................................................................................................................
QoS DefaultsQoS PTM Setup
10-12
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Figure 10-6 QoS Defaults window
Table 10-6 describes the fields of the QoS Default window.
Table 10-6 Field descriptions
Field Description
Interface Select a WAN connection to configure its default QoS policy.
Original Tos Tag
(First 3 bits of
DSCP)
Select Original Tos Tag (type of service) to assign the queue according
to the incoming Tos value.
Specified Queue Select Specified Queue and enter a queue number (0 to 7) to assign to
the incoming traffic.
Keep Original
ToS
Select Keep Original Tos to retain the original value.