User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
QoS ALGQoS PTM Setup
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
10-9
............................................................................................................................................................................................................................................................
QoS ALG
The QoS application level gateway (ALG) window enables you to configure the session
initiated protocol (SIP) and the real-time transport protocol (RTP). SIP is used by VoIP,
and RTP is the protocol for transferring real-time data (such as interactive audio and
video).
Select QoS ALG in the QoS PTM Setup menu to access the QoS ALG window; see
Figure 10-5.