User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
............................................................................................................................................................................................................................................................
QoS PolicyQoS PTM Setup
10-6
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Netmask Select the subnet mask of the source host.
Interface Select the radio button and select a connection to configure its QoS policy.
MAC Address Select the radio button and enter the MAC address.
Destination
IP Address Enter the IP address of the destination host.
Netmask Select the subnet mask of the destination host.
Protocol Click Select Protocol to choose a protocol.
Source Port Enter the range of source ports for this QoS policy.
Destination Port Enter the range of destination ports for this QoS policy.
QoS Classification
Queue Select one of the following:
• Original ToS Tag to assign the queue according to the incoming ToS
value.
• Specified Queue and enter a queue number (0 to 7) to assign to the
incoming traffic.
ToS/DSCP
Remarking
Select one of the following:
• Keep Original ToS/DSCP to retain the original value.
• New ToS Value and enter a queue number (0 to 7) to assign to the
incoming traffic.
• New DSCP Value and enter a DSCP value (0 to 63).
CoS (p-bit)
Remarking
Select one of the following:
• Keep CoS Value to retain the original value.
• New CoS Value to set a new CoS value for incoming traffic.
• Align CoS with ToS value to set CoS same as the ToS value for
incoming traffic.
Add Click to add the policy and save your changes.
Overview
Target Upstream or Downstream. Target 1 is the highest priority.
Source IP IP address of the source host.
Netmask Subnet mask of the source IP address.
Source Port Port number of the source host.
Destination IP IP address of the destination host.
Netmask Subnet mask of the destination IP address.
Destination Port Port number of the destination host.
Field Description