User Manual
,VVXH 0D\
:$51,1*
Please use for this inlet only the power adapter, which is shipped with your 7130 RG
5Ve.AL2000/7130 RG 5Ve.B2000 VDSL2 gateway. Failure to comply with may cause
damage to the CPE.
3RZHUVZLWFK
The power switch is used for turning “ON” and “OFF” the device.
5HVHWVZLWFK
The reset switch serves two functions as explained here:
•
Reset the device
•
Turn “OFF” the Power switch and turn it “ON” again to reset the device.
•
Reset and restore the default settings
•
Using a pointed object, push down the Reset button and hold for 5 seconds (PWR
LED turns “Off”), then release. This operation will reset the device to factory
defaults.
,QWHUIDFHV
•
Ethernet
The Ethernet LAN ports are RJ-45 connectors with switching functionality. They also
feature the Auto MDI/MDIX function, which allows using either a crossover or a
straight cable to connect a Hub or PC.
The left LED indicates connectivity with a device. The second LED indicates whether
the connection speed is 10 Mbps or 100 Mbps; that is, it will be “ON” if the
connection speed is 100 Mbps.
•
The left LED indicates connectivity with a device. The second LED indicates whether
the connection speed is 10 Mbps or 100 Mbps, that is it will be “ON” if the connection
speed is 100 Mbps.
•
VDSL
The VDSL port is used for the WAN connection.