User Manual

8
Setting the
Network Key
Automatically
The PC will begin functioning in Station Mode (as a Client) with
your Wireless LAN Network as soon as the Network Key is set-up.
1. Find the Network Key (WEP Key or WPA Key) for your Wireless
Network.
2. Launch the Connect to a Network dialog box. (See above for
instructions)
3. Select the Wireless Network of your choice by clicking on its name
and the entire block will become highlighted.
4. Select Connect in the lower right corner.
The Entering Network Key dialog box will appear as shown below.
Figure: 4.2Wireless Network Connection dialog box
5. Enter your Network Key (WEP Key or WPA Key) or Passphrase for
your Wireless Network.
Note: If you do not have an existing wireless network you will
need to set up your Wireless Router/ Access Point prior to
using your PC in Station Mode.