User's Manual

If you select
Disable
for the DHCP Status, you will need to enter the
appropriate IP address information. You will need to do this if your
computer cannot automatically obtain an IP address for the 802.11g
Wireless USB Adapter. When you have entered all the information,
click
Complete
to finish the profile setup.
Open System
If you select
Open System
, you will then need to select the level of
Encryption. You can select either 64 bit or 128 bit. This encryption is
known as WEP.
WEP is an encryption scheme that is used to protect your wireless
data communications. WEP uses a combination of 64-bit keys or 128-
bit keys to provide access control to your network and encryption
security for every data transmission. To decode a data transmission,
each wireless client on the network must use an identical 64-bit or
128-bit key.
When you have made your selection, click
Next
.
You will then need to select your Input Method.