User's Manual

Figure 1
b. Connect the other end of the USB cable to any USB connector on the back of your
desktop computer as shown in Figure 2.
Figure 2
c. The
Found New Hardware
screen will appear.
d. The driver for your device will be automatically detected and installed.
e. Check for the
Green Light
on the device to make sure the USB cable is connected
between the device and the system correctly.
f. The
New network device installed
screen will appear on the bottom right corner. Click
X
to close the message.
(XP only)
Back to Top
3. Connecting to Your Wireless Network
To connect to the wireless network, the wireless network name (SSID) of the
wireless USB
adapter
must match the wireless network name specified by your Wireless Broadband Router*.
To set the network name, follow the instructions below for Windows XP operating system. For
Windows 2000, follow instructions under
section 3.2
.
3.1 Connecting using Windows® XP Operating System
a. Click on the
Wireless Network Connection
pop up message on the
bottom right corner.
Pa
g
e 2 of 4Gettin
g
Started with
y
our Dell TrueMobile 1300 Wireless USB Ada
p
ter: Dell TrueMo...
30-9-2003file://C:\Documents%20and%20Settin
g
s\dsarired\M
y
%20Documents\
p
ro
j
ects%20200...