User's Manual

2 Right-click the Local Area Connection icon for the wireless Ethernet hardware,
P/IP) check box in the Components
hecked are used by this connection list. If you do not see TCP/IP, drag the scroll
Properties dialog box opens.
Click Obtain an IP address automatically.
ties dialog box.
your notebook
”
dapter name, then click
quency wireless communication can interfere with equipment
that
et network, you are ready to create a
ting a
indows
network device.
u create and configure your wireless Ethernet network and you know how to turn
our wireless emitter on and off, you are ready to use the network. Go to the sharing your
sources section in the Setting Up Your Wireless Windows Network guide included on
e installation CD that came with your network device.
then click Properties. The Local Area Connection Properties dialog box opens.
3 Click to select the Internet Protocol (TC
c
bar to see more choices.
4 Click Properties. The Internet Protocol (TCP/IP)
5
6 Click OK to close the Internet Protocol (TCP/IP) Proper
7 Click OK to close the Local Area Connection Properties dialog box.
8 Click X to close the Network and Dial-up Connections window.
9 Repeat this procedure for every computer on your network.
10 After you set up the IP addresses on all your computers, go to “Where to go from
here” .
Turning the wireless emitter off
You can turn off the wireless emitter to conserve the battery charge on
computer or to make a computer unavailable on the network. There are times, such as
when you are flying in an aircraft, when you should turn off your wireless emitter. For
more safety and regulatory information, see “Safety, Regulatory, and Legal Information
To turn the wireless emitter off:
Click the remove hardware icon in the taskbar, the USB a
Stop.
- OR -
Turn off your computer.
Warning Radio fre
on commercial aircraft. Current aviation regulations require wireless
devices to be turned off while traveling in an airplane. IEEE 802.11a, IEEE
802.11b, and IEEE 802.11g communication devices are examples of devices
provide wireless communication.
Where to go from here Creating your wireless Ethernet network
Now that you have configured your wireless Ethern
wireless network. Go to the creating a wireless access point network or crea
peer-to-peer wireless network section in the Setting Up Your Wireless W
Network guide included on the installation CD that came with your
Using your wireless Ethernet network
After yo
y
re
th
15