User's Manual

8 Click OK to restart your computer and complete the
tep 2: Configuring the USB adapter Naming the computers and the
he first time you use networking on your computer, you need to give each computer a
p.
window opens.
ox opens.
box opens.
Type a unique computer name in the Computer name box. This name identifies the
omputer to other users on the network. Use a computer name of up to 15 characters with
o blank spaces. Each computer name must be unique on your network. All-numeric
omputer names are not allowed. Names must contain some letters.
Type a name for your workgroup in the Workgroup box. Use a workgroup name of
p to 15 characters with no blank spaces. The workgroup name must be the same for all
omputers in your network workgroup, and the name must be different than any
omputer name on your network.
Click OK to close the Identification Changes dialog box.
Click OK to close the System Identification dialog box.
After you name each computer and assign it to your workgroup, go to “Step 3:
S
workgroup
T
unique name and assign each computer to the same workgrou
To identify a Windows 2000 computer on the network:
1 Click Start, Settings, then click Control Panel. The Control Panel
2 Double-click the System icon. The System Identificationdialog b
3 Click the Network Identification tab.
4 Click Properties. The Identification Changes dialog
5
c
n
c
6
u
c
c
7
8
9
Configuring the TCP/IP protocol”.
13