User Manual

10
4.2. Installation Procedure
Please follow the following steps one by one in order to install successfully.
The PRISM WLAN Configuration Utility is installed simultaneously with the driver by executing the
PRISM for Windows.exe file. Installation procedures differ depending on whether this is an initial
installation or an upgrade. The following sections discuss these scenarios.
Note also that some versions of Microsoft Windows operating systems require administrator privileges
to install software. If this is the case for your operating system, be sure that you have such privileges
before executing the PRISM for Windows.exe file.
To upgrade an existing driver, it is not necessary to remove your PRISM card from your computer.
Simply run the PRISM for Windows.exe file to replace the existing driver with the latest version. After
the new driver is installed, you must restart the operating system (if the system was not restarted
during the installation procedure).
1. Insert the given Installation CD in the CD-ROM.
2. Select CD-ROM drives to locate driver files.
3. Find the software in the CD-ROM and run the program “ PRISM for Windows.exe file ” in order
to set up configuration utility & driver.
Follow the instruction and click Continue.
Note: Do not insert the WLAN USB adapter until you are asked to do so, failure of which may result in unsuccessful
installation of your 11Mbps Wireless LAN Mini USB Adapter