User Manual

For the Card under Windows 2000:

Please check the followings if you encounter some problem while installing the Mini-PCI card or your

Mini-PCI card is non-functional.

1. Check the Windows 2000 Diagnostics. You should find out whether there is any conflict

in the resource allocation or the I/O address, IRQ allocations. If you find that the IRQ or

I/O addresses are already assigned to some other devices, you must change that value.

I/O address needs 40h byte length.

2. Click on the Control panel. Double click on the Mini-PCI Card, you will see Wireless LAN

Mini-PCI 11Mbps Card . Double clicking on that will show you the Card Information,

driver name and the driver file. You must confirm the name of the driver and the driver file

as "cw10" and "cw10.sys". If you do not find the names as we listed before, there are

some problems and the driver is not installed properly. Reinstall the driver.

Note: Check the PnP BIOS setup menu and select no in case of the Wireless LAN 11Mbps

Card installation.