User Manual

BROWAN COMMUNICATIONS Page 82
Wireless Settings | Configuration
Enable Wireless Networking
It allows you to enable/disable the wireless section of your
LAN. When disabled, the router will close all the wireless
connection and no wireless PCs can get the access to either
the Internet in wired LAN of the router.
Wireless Mode
From this drop-down menu, you could see the selection
which including mixed, wireless-B only, wireless-G only,
Dynamic SuperG and SuperG without turbo. You could
choose the proper wireless standards running on your
network. The default setting is mixed mode.
Service Area Name/SSID
This allows you to name your Wireless network. The field
will accept any alphanumeric string but not spaces and has
a maximum length of 32 characters. Your Wireless PCs
must be configured with exactly the same name or you will
not establish a connection.
The Service Area Name may also be referred to as ESSID