User Manual

BROWAN COMMUNICATIONS Page 79
IP Pool Start Address
This defines the start address of the IP address range.
When the Router is acting as a DHCP server, it will issue IP
addresses to the devices on the LAN from within the IP
address range. The default value is 192.168.1.2.
IP Pool End Address
This defines the end address of the IP address range. The
default value is 192.168.1.254.
DHCP Relay:
The DHCP Relay Agent can deliver the IP address from the
DHCP Server and allows you to place DHCP Clients and
DHCP Servers on the same network. Deploying DHCP in a
single segment network is easy.
All DHCP messages are IP broadcast messages, and
therefore all the computers on the segment can listen and
respond through the DHCP relay to these broadcasts. A
single scope on a solitary DHCP server is all that is
required.