User Manual

BROWAN COMMUNICATIONS Page 78
LAN Settings | Unit Configuration
LAN Settings:
The Router must be given a valid static IP address and
subnet mask for the LAN interface.
IP Address:
This is the IP address for PC accessing the Router on the
LAN. The default value is 192.168.1.1.
Subnet Mask:
This is the Subnet Mask for the Router. For devices to be on
the same subnet, they must have the same subnet mask.
The default value is 255.255.255.0.
DHCP Server Parameters:
The Router can act as a DHCP (Dynamic Host Control
Protocol) Server for your LAN and can automatically
allocate IP addresses to the other devices on the LAN. To
use the Router as a DHCP Server, you must tick the The
Router acts as a DHCP Server.