User Manual

BROWAN COMMUNICATIONS Page 162
Advanced | 1 to 1 NAT
The following criteria must be met to be able to use
One-to-One NAT：
You must have a static Internet IP address for every
computer on your network plus one for the Router
itself.
The addresses must be in one continuous block in the
same subnet
You must have selected Static IP Address as your IP
Allocation Mode and have given your VPN Firewall the
first of the Internet addresses allocated by your ISP.
To set up One-to-One NAT：
Enable the entry of One-to-One NAT.
Enter the Internet addresses in ISP Pool field. (WAN IP
address).
Enter the IP address in your LAN side to which you
want to map it in LAN Pool field.