User Manual

BROWAN COMMUNICATIONS Page 161
Advanced | Proxy ARP
Proxy ARP is the technique in which one machine, usually a
router, answers ARP requests intended for another
machine. By "faking" its identity, the router accepts
responsibility for routing packets to the "real" destination.
Proxy ARP allows a site to use a single IP address with two
physical networks.
Following is the setting procedures on Proxy ARP function
1. Set the GW wan IP in static ip mode, such as IP：
10.0.0.2, submask：255.255.0.0, route：10.0.0.1
2. Enable Proxy ARP on WEB UI and set the Public IP
range you want to set on PC in your LAN network such
as from 10.0.0.3 to 10.0.0.14
3. Set PC in your LAN network with one of those Public IP,
such as IP：10.0.0.3, submask：255.255.0.0, route：
10.0.0.1