User Manual

BROWAN COMMUNICATIONS Page 159
Disable NAT is enabled by：
Checking on the Disable NAT check box so that a
tick can be seen.
Clicking he Apply button.
IPSec Pass-through
Internet Protocol Security (IPSec) is a suite of protocols
used to implement secure exchange of packets at the
IP layer. IPSec Pass-Through is enabled by default.
L2TP Pass-through
Layer 2 Tunneling Protocol is the method used to
enable Point-to-Point sessions via the Internet on the
Layer 2 level. L2TP Pass-Through is enabled by
default.
PPTP Pass-through
Point-to-Point Tunneling Protocol (PPTP) allows the
Point-to-Point Protocol (PPP) to be tunneled through
an IP network. PPTP Pass-Through is enabled by
default.
GUI timeout