User Manual

BROWAN COMMUNICATIONS Page 150
configuration information from the Router and return it to
the state it was in when it was shipped from BROWAN. The
unit will then restart. This function might be useful if, for
instance, a Router is moved from one network to another
and you wish to start the configuration process from a
known clean state.
This function should be used with caution, as once a unit
has been reset to its factory default state, then the current
configuration settings are irrevocably lost. It is strongly
recommended that you backup the current configuration
with the Backup Configuration facility before using the
Reset to Factory Defaults function unless you are certain
that the current settings are no longer needed.