User Manual Part 3

User’s Guide Version 1.0
/Gemtek/Header/@Script_Name - current script name, to send command to logout or refresh the
statistics on page.
/Gemtek/Data/entry/@auth - authentication method.
/Gemtek/Errors/@id - returned error code. Error code is a follows:
error description
4107
Already logged in. This error code usually comes from
login screen, when redirecting.
Following error codes are sent when other than the LOGOUT command is submitted:
error description
4201 Failed to authorize.
4202 Login failed.
4203 Network connection failed.
4204 Accounting error.
4205 Undefined error return from RADIUS client on BW1330.
4206 Already logged in.
Following error codes are sent when other than LOGOUT command is submitted:
error description
4210 Already logged in.
4211 Failed authorization.
4212 Login failed.
4213 Network connection failed.
4214 Accounting error.
4215 Undefined error return from RADIUS client on BW1330.
/Gemtek/Data/@cmd - link to logout page.
/Gemtek/Data/@login - link to login page. This is used when the user is logged-off and to provide
a quick link to be used to register again.
/Gemtek/Data/entry/@username - username with which user is logged in.
/Gemtek/Data/entry/@ip - detected user IP address from which the user has made his attempt to
register on the network.
/Gemtek/Data/entry/@mac - detected users MAC address.
/Gemtek/Data/entry/@time - session time.
/Gemtek/Data/entry/@idle - idle time.
/Gemtek/Data/entry/@in - input bytes sent.
/Gemtek/Data/entry/@out - output bytes sent.
/Gemtek/Data/entry/@remain_down - input bytes left.
/Gemtek/Data/entry/@remain_up - output bytes left.
/Gemtek/Data/entry/@remain_total - total bytes left.
/Gemtek/Data/entry/@remain_time - session time remaining.
/Gemtek/Data/entry/@down - bandwidth downstream.
/Gemtek/Data/entry/@up - bandwidth upstream.
BROWAN Page
147