User Manual Part 3

User’s Guide Version 1.0
System Commands
system
access System access configuration.
configuration System configuration.
system access
aaa Multimode settings.
Allow or deny management access depending on user network
address.
control
firewall Firewall configuration.
iplogging Enabling or disabling IP request logging.
snmp Configuration of SNMP service.
telnet Enabling or disabling of telnet protocol.
uat Universal Address Translation of all IP and proxy settings.
system configuration
clock Manual setting of internal device clock
ntp Configuration of Network time Protocol service.
pronto Pronto compatibility agent configuration.
syslog For sending system and debug messages via syslog protocol.
trace Displays the last logged messages.
upgrade Auto firmware upgrade configuration.
System Access Commands
system access aaa
<interface> Interface to set AAA on.
Either disabled or space separated list of modes. Modes may be:
uam, 8021x, mac, proxy.
-m <mode_list>
Mac authentication mode password usage: 'radius' - use radius
shared secret key, 'user' - use user defined password.
-u <use_password>
-p <password> User defined mac authentication password.
system access control
Action to take upon management access entry: A(dd), E(dit),
D(elete) or default.
<action>
Management access entry id. Needed only when editing or
deleting entry.
<id>
Services for which the policy should be set: ssh, snmp, telnet or
all.
-s <service>
-a <ip/bitmask> 'all' or network ip address and bitmask to (dis)allow service to.
-p <policy> Management access policy: allow or deny(default is deny).
system access firewall
Action to take upon the rule: A(dd), I(nsert), E(dit), R(emove),
move U(p), move D(own).
<action>
<id> Firewall rule index. Not needed when adding a new rule.
-c <type> Rule type: input, output, forward.
BROWAN Page
137