User Manual Part 3

User’s Guide Version 1.0
BROWAN Page
accounting
<id> RADIUS server id.
-a <ip_address> RADIUS server IP address used for Radius accounting.
-p <port> RADIUS server port used for Radius accounting.
Shared secret key for accounting (must be the same on RADIUS
server and RADIUS client).
-s <secret>
network radius servers
authentication
Action to take uppon radius server. May have values A(dd), E(dit),
D(elete).
<action>
<id> RADIUS server id.
-n <name> RADIUS server name.
-a <ip_address> RADIUS server IP address.
-p <port> RADIUS server port.
Shared secret key (must be the same on RADIUS server and
RADIUS client).
-s <secret>
Sets the server as default. Possible values: yes. Note: there can
be only one default Radius server.
-d <default>
-r <status> Reverse accounting. May have values enabled or disabled.
Strip WISP name before sending to RADIUS. May have values
enabled or disabled.
-w <status>
UAM authentication method for RADIUS server. May have values
pap, chap, mschap1 and mschap2.
-u <method>
network radius servers
backup
<id> RADIUS server id.
If RADIUS Backup Server feature is on. May have values enabled
or disabled.
-b <status>
-a <ip_address> Backup RADIUS server IP address used for Radius accounting.
-p <port> Backup RADIUS server port used for Radius accounting.
Shared secret key for backup server(must be the same on
RADIUS server and RADIUS client).
-s <secret>
network radius settings
-r <retries> Retry count of sending RADIUS packets before giving up.
Maximal amount of time before retrying RADIUS packets (in
seconds).
-t <timeout>
-n <nas> NAS Server identification string.
Amount of time from user side (no network carrier) before closing
the connection (in seconds).
-o <user_timeout>
Period after which server should update accounting information
(in seconds).
-a <acct_update>
Retry time period in which server should try to update accounting
information before giving up (in seconds).
-c <acct_retry>
Amount of user inactivity time, before automatically disconnecting
user from the network (in seconds).
-i <idle>
-u <bandwidth> Default Radius user upload bandwidth.
134