User Manual Part 3

User’s Guide Version 1.0
BROWAN Page
-s <status> The interface status. Possible values are enabled and disabled.
-a <ip_address> Interface IP address in digits and dots notation, e.g. 192.168.2.27.
-m <netmask> Interface subnet mask e.g. 255.255.255.0.
Interface gateway in digits and dots notation or name of other
interface.
-g <gateway>
The status of dhcp client for the interface. May have values
enabled and disabled. Can be used with WAN interface only.
-d <dhcpclient>
-q <masquerade> Masquerade status for interface: enabled or disabled.
-u <authentication> Authentication status on interface: enabled and disabled.
-v <visitor_access> Visitor access for interface: values enabled and disabled.
network configuration
portforward
<action> Action to take upon Port Forwarding entry: A(dd), E(dit), D(elete).
<id> Port Forwarding entry id. Needed with actions E(dit) and D(elete).
-s <status> PortForwarding rule status: enabled or disabled.
-p <protocol> Rule protocol.
-a <ip> Source ip address.
-l <port> Source port.
-d <ip> Destination ip address.
-r <port> Destination port.
network configuration routes
Action to take upon the route. May have values A(dd), E(dit),
D(elete).
<action>
<id> Route id. Needed only with actions E and D
-s <status> Route status. May have values enabled or disabled.
-d <device> Interface name.
-t <target> Target ip address.
-m <netmask> Target netmask.
-g <gateway> Gateway for the target address.
network configuration subnet
<interface> Interface name on which the management subnet is configured.
-s <status> Interface ip address for management subnet.
-a <ip_address> Interface ip address for management subnet.
-m <netmask> Interface netmask for management subnet.
Network from which users are allowed to access management
subnet.
-n <filterNetwork>
Netmask of network from which users are allowed to access
management subnet.
-t <filterNetmask>
network configuration vlans
<action> Action to take upon VLAN interface: A(dd), E(dit), D(elete).
<id> VLAN interface id. Needed only with action A.
Name of LAN interface on which VLAN interface exists. Needed
only with action A.
<interface>
<name> Name of VLAN interface. Needed only with actions E and D.
132