User Manual Part 3

User’s Guide Version 1.0
C) CLI Commands and Parameters
Network Commands
network
configuration Network Interfaces configuration.
dhcp Dynamic Host Configuration Protocol services configuration.
dns DNS Server settings.
radius Configuration set for changing RADIUS Server settings.
tunnels Tunnels configuration commands.
network configuration
bridge Bridge configuration
interface Network Interfaces configuration.
portforward Port forwarding setup.
routes Static IP routing settings.
subnet Management subnet configuration.
vlans VLANs configuration.
network configuration bridge
configuration Bridge configuration.
ports Bridge ports configuration.
network configuration bridge
configuration
<action> Action to take upon a bridge interface: A(dd), E(dit), D(elete).
<id> Bridge interface identifier (number)
-a <aging> Bridge aging time.
-g <garbage> Garbage collector interval.
-t <stp> Spanning Tree Protocol status: enabled or disabled.
-p <priority> Bridge priority: low, medium or high.
-d <delay> Bridge forward delay.
-h <hello> Bridge hello time.
-e <age> Bridge maximum age.
network configuration bridge
ports
<bridge> Bridge name to add or delete interface (port) from.
<action> A(dd) or D(elete) interface(port) from bridge.
-i <interface> Interface (port) name.
-c <cost> Port path cost in the bridge interface.
-p <priority> Port priority in the bridge interface.
network configuration
interface
<interface> Standard UNIX interface name. This name cannot be changed.
BROWAN Page
131