User Manual Part 3

User’s Guide Version 1.0
BROWAN Page
128
A) Access Controller Specification
Technical Data
Wireless
Standard
IEEE 802.11g (OFDM), IEEE 802.11b (DSSS), 2.4GHz ISM band, Wi-Fi
certified
Data Rate
802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps, 802.11b: 11Mbps, 5.5Mbps, 2,
1Mbps (auto fall back)
Client Stations Max. 100 simultaneous client stations(wireless+LAN)
Typical range 50 meters in indoor environments, up to 300m outdoors
Transmit Power Max. 19 dBm
Antennas Two 2.33 dBi dipole antennas, R-TNC connectors.
Encryption WPA, WPA2, WPA-PSK, WEP64, WEP128
WDS Wireless Distribution System
Network and Hotspot Access Control
 IP Router with NAT/NAPT, configurable
firewall filters
 Hotspot access controller with web browser log-
on (UAM) and 802.1x/EAP support, Smart Client
support, MAC authentication, WISPr compliant
(Wi-Fi alliance)
 AAA RADIUS client and proxy server
with EAP support
 Extended Universal access method (web browser
log-on) with XML support and walled garden (free
web sites)
 Universal address translation and web
proxy support (any client configuration
is accepted)
 WISPr compatible log-on via web browser,
SSL/TLS support UAT
 VPN client (GRE)  IEEE 802.1x authenticator with EAP-SIM, MD-5,
TLS, TTLS, PEAP
 WPA support  DHCP server, DHCP relay gateway, DHCP client
 VPN pass-through  Layer 2 user isolation
 E-mail redirection  Bandwidth management via RADIUS
Interface
WAN One 10/100Mb Ethernet, auto sensing (speed, duplexity, MDI/MDIX),
RJ-45
LAN
One 10/100Mb Ethernet port, auto sensing (speed, duplexity, MDI/MDIX),
RJ-45, 802.1q VLAN support
WLAN Two R-TNC antenna connectors
Management
Interfaces
HTTPs, SSH, Telnet, SNMP (MIB II, Ethernet MIB, bridge MIB, private
MIB)
Software Update Remote software update via HTTP, HTTPs or FTP
Reset Remote reset / Manufacturing reset
Console RS-232 DB-9 Connector
Physical Specification
Appendix