User Manual Part 2

User’s Guide Version 1.0

The authentication RADIUS proxy port should differ from the accounting port.

Step 3 Configure the AP to send the RADIUS authentication and accounting packets to the

AC LAN IP address and UDP ports which are configured on AC RADIUS proxy configuration.

Step 4 The RADIUS secrets on AC should be set to value, which is good at the real RADIUS

server for which the following packet will be forwarded.

Such preconfigured AC will act as RADIUS proxy and will forward the RADIUS authentication and

accounting packets from AP according WISP and RADIUS server settings in the AC configuration

without any modification.

Network Interface | RADIUS | Accounting Backup

The administrator can backup the hotspot subscribers’ RADIUS accounting information in two ways:

 Via syslog protocol to the specified host

 Download to the selected location (e.g. on your PC)

Use the network interface | RADIUS | accounting backup menu:

Figure 118 – Accounting Backup

Backup via syslog – enable this type to send the RADIUS accounting information via syslog protocol

to the specified host [enable/disable] and note that the Host IP specification is obligatory.

Host – enter host IP address where to send accounting backup messages.

Backup to local file – enable this option, and the download button appears:

Figure 119 – Accounting Backup enable

Download – click the button to download the accounting information file to your selected location.

Both types of accounting backup can be enabled.

BROWAN Page