User Manual Part 2

User’s Guide Version 1.0
Condition 1 and 2 can be met if operator applies a right certificate. We use Domain configuration on
BW1330 to meet the condition 3.
Please fill-out the domain name use the format such as a URL, for example: www.bw1330.com,
which will be the same with the “host name” on the digital certificate. Create a new certificate with
hostname = www.bw1330.com and then install on BW1330.
Figure 176 –Domain Name configuration
And after that, the third item which “the security certificate has a valid name matching the name of
page you are trying to view” will be OK.
System | Configuration | Share Username
Use the Share Username menu to control the status (disabled/enabled) of if one user account can be
shared with more than one client.
Figure 177 – Share user name
if the share user name setting is “disable”, it means that one user account only can be used by one
client simultaneously; In another hand, if the setting is “enable”, it means multi-clients can share one
user account simultaneously.
“Share User” enable is using is the scenario that venue owner allow two or three
client use only one account simultaneously. The default setting is disabled.
System | Access | Access Control
Use the access control menu to control management access to your AC and to specific services.
Access control to your device includes access to these services:
 Telnet
 SSH
 SNMP
The administrator can control access to the controller via telnet, SSH or SNMP for all users of for
individual users. This is done by creating an access control list in the AC and checking the incoming
user’s IP address.
Default access status is used to deny or allow all connections to the controller except those using
the SNMP service.
The SNMP service is used to provide access to your device from the KickStart
utility.
Figure 178 – Access Control
BROWAN Page
102