User Manual Part 2

User’s Guide Version 1.0
QoS – Quality of Service, stand for the priority of this SSID, the value of QoS is from 0 to 7, with the
order: (1, 2, 0, 3, 4, 5, 6, 7), which 1 stand for the lowest priority which 7 stand for the highest priority.
Security – Specify the security policy.
WEP – When selected, the privacy of MSSID entry will be set to WEP (Wired Equivalent Privacy).
WEP Key Index – Select the default key Index to make it the Default key and encrypt the data before
being transmitted. All stations, including this MSSID Entry, always transmit data encrypted using this
Default Key. The key number (1, 2, 3, 4) is also transmitted. The receiving station will use the key
number to determine which key to use for decryption. If the key value does not match with the
transmitting station, the decryption will fail. The key value is set in Network interface | wireless | Sec
WEP page.
802.1x – When selected, the MSSID entry will be configured as an 802.1x authenticator. It supports
multiple authentication types based on EAP (Extensible Authentication Protocol) like EAP-TLS, EAP-
TTLS, EAP-PEAP, EAP-SIM. The privacy will be configured as dynamic WEP.
You must enable RADIUS Proxy in order for wireless 802.1x authentication to work
with BW1330. To enable RADIUS Proxy, please refer to Network Interface |
RADIUS | Proxy, the RADIUS Proxy default is disabled.
RADIUS Server Profile – Select the default radius server name. If not, please configure Network |
RADIUS Servers Web page first.
Dynamic Key Length – Select the dynamic 64-bits / 128-bits encryption.
WPA – Wi-Fi Protected Access, When selected, the encrypt method will be WPA with RADIUS Sever.
RADIUS Server Profile – The same as 802.1x.
Algorithm – Choose WPA algorithm (TKIP, AES).
Use ReKey – If not selected, indicates that Group Key will not be rekeyed. If selected, must
specify the time in minutes, after which the group key will be updated.
Every … minutes – Specify amount of minutes and WPA automatically will generate a new
Group Key.
WPA-PSK – When selected, the encrypt method will be WPA without RADIUS Server.
Use Pre-Shared Key – Specify more than 8 characters and less than 64 characters for WPA with
pre-shared key encryption.
Algorithm – The same as WPA.
Use Rekey – The same as WPA.
Every … minutes – The same as WPA.
MAC Auth – MAC authentication. When selected, the MAC address of username and password
will be passed to RADIUS server for PAP authentication when wireless client connects with BW1330.
RADIUS Server Profile – The same as 802.1x.
Disabled – When selected, no security policy will be applied.
Each time create a new MSSID or WDS, administrator need configure the relative
network configuration in menu Network interface | configuration | interface
configuration such as interface IP, netmask and also the DHCP configuration.
BROWAN Page
84