User Manual Part 2

User’s Guide Version 1.0

Figure 131 – Multiple BSSID Setting

Radio – showing which RF card, for BW1330 it is fixed: wlan1;

Mode – showing the current operation mode, for BW1330 it is fixed: AP mode;

SSID – a unique ID for your wireless network. It is case sensitive and must not exceed 32 characters.

The SSID is important for clients when connecting to the access point. All client stations must have

their client SSID settings configured and must use the same SSID.

Each MBSSID entry (BSSID) can has its own SSID. And SSID can be same for

different BSSID

Hidden SSID – When enabled, the SSID of this Interface is invisible in the networks list while

scanning the available networks for wireless client (SSID is not broadcasted with its Beacons). When

disabled, the AP’s SSID is visible in the available network list [enabled/disabled]. By default the

Hidden SSID is disabled.

BROWAN Page