User Manual Part 2

User’s Guide Version 1.0
Reboot – Click the button to restart the server and apply the changes.
And if there are still other setting modifications needed, go ahead to finish all
changes and then click Reboot button to restart and apply all settings.
Network interface | wireless | Advance
BW1330 supports Multiple BSSID (MBSSID) function. You can configure up to 16 BSSIDs per radio
on BW1330 and assign different configuration settings to each BSSID. For wireless users, they can
think BW1330 as single AP with multi service supporting, including different security policy, different
subnet, different authentication etc. All the BSSIDs are active at the same time that means client
devices can associate to the access point for specific service. Use the Wireless | Advance menu to
configure properties related to Multiple BSSID, including configure SSID, Hidden SSID, and Security
for each SSID.
Each BSSID can have its own SSID. In this case, Multiple BSSID is the same with
Multiple ESSID. Wireless users can think BW1330 as multiple virtual APs, each
supporting different service, and connects one SSID for the special services.
Click edit or new button to modify or create virtual APs.
Figure 130 – Detail for MBSSID entry
Detail – Show the wireless settings of BW1330.
Edit – modify current virtual AP settings of SSID/Security etc.
Clicking New or Edit on AP mode, the settings of MBSSID entry appears:
BROWAN Page
82