User Manual Part 1

User’s Guide Version 1.0

figure 9 administrator page

Software Introduction: KickStart

 Another way is launch the KickStart utility that is provided with your product CD. The KickStart is

a software utility that is included on the Installation CD. The utility automatically detects access

points and access controllers installed on your network, regardless of its host IP address and lets

you configure each unit’s IP settings. The feature list for the KickStart utility is listed below:

 Scanning your subnet for all connected APs, ACs

 Quick access to your AC via HTTPS, telnet, SSH

 Setting new IP address of your AC

 Reset to factory default settings

 Default access (in case of lost administrator password)

 Firmware updates

To install the KickStart utility insert the Installation CD into your CD-ROM drive. Find and install the

utility from the product CD into the computer.

If the Installation CD does not start automatically, please run “autorun.exe”

manually from the root directory of the installation CD.

Step 1 Install the KickStart utility from the Installation CD. Click Start > Programs >

BROWAN > KickStart to launch the application. If the BW1330 device is

connected to your network, the utility will automatically find your AC:

BROWAN Page