Manualshelf

User Manual Part 1

ManualsBrandsGemtek Technology ManualsElectronicsHigh Performance Hotspot Access Point
11121314151617181920
User’s Guide Version 1.0
Back Panel
Figure 2 – Back Panel of the BW1330
The back panel of the Access Controller contains:
Model and device name (see item 1 in figure above). The official device name is High
Performance Hopspot Access Point, model BW1330.
MAC address of the device. The label (item 2 in figure above) shows the LAN interface MAC
address of the device. You can determine the WAN and WLAN(Up to 16 MBSSID) interfaces’
MAC addresses by a simple calculation:
WAN interface MAC = LAN MAC + 1 (Hex)
WLAN(MBSSID) interface MAC = LAN MAC + 1 (Hex) by sequence up to 16 MAC
LEDs
The Access Controller has several LEDs located on the front panel:
Figure 3 – LEDs of the BW1330
BROWAN Page
12