User Manual Part 2

Wireless Nd1 Router User Guide
● If you select No log, no log information will be recorded.
● If you select Log denied connections only, any unsuccessful attempts, by a client,
to connect to your router will be recorded.
● If you select Log accepted connections only, any successful attempts, by a client,
to connect to your router will be recorded.
● If you select Log accepted and denied connections, any successful or unsuccessful
attempts, by a client, to connect to your router will be recorded.
System Log
Using this feature you can configure the router to send its system log to a remote host. The
system log is sent using User Datagram Protocol (UDP) with destination port 514 by default.
1. Select the checkbox next to System log in the System Log section.
Note: The router can only send system logs to hosts reachable on its
LAN interface.
2. Specify the IP address of the remote host and remote port (if applicable).
file:///G|/CSO/Documentation/Documentation%20-%20Dra...5464%20Mach-1%20Router/User%20Guide/English/log.html (3 of 4)9/14/2006 2:44:26 PM