User Manual

computers. Microsoft Internet Explorer 4.0 or higher or Netscape 4.0 or higher must
be used for the web-based configuration tool.
Factory Default Settings:
Dell pre-configures the Wireless 2350 with the following settings:
NOTE:
If you lose track of the device settings, you can reset the router by pushing the
reset button to restore these settings back to your router.
Setting Default
User Name admin
Password admin
Device Name Wireless 2350
IP Address 192.168.2.1
Subnet Mask 255.255.255.0
10 Mbps Ethernet WAN IP <obtain from ISP via DHCP>
WAN DHCP Client Enabled
ESSID (wireless network name) wireless
Channel 6
Encryption No Encryption
DHCP Server Enabled
NAT Routing Enabled
NOTE:
Your Wireless 2350 Broadband Router came with factory default settings that
should work for the majority of the network usage scenarios. However, there are
cases where your network environment may require a different router
configuration.