User Manual

Enable DHCP Server Functions
By default, the Router is set to function as a DHCP server. If you are installing the unit on an
existing network that already has a DHCP server or simply do not want the Router to function
as the network's DHCP server, click to deselect Enable DHCP Server Functions to disable
the DHCP server function.
IP Address Pool Range
The IP Address Pool Range section provides a means of controlling a low and high value for
the IP addresses on a network. Use the indicated fields to define the range of IP addresses
you would like the Router to provide to DHCP clients. The valid range of numbers you should
enter is between 1 and 254.
The lease time is the amount of time a user will be allowed to use the IP address assigned by
the DHCP server. You may specify the lease time that DHCP server offers for the client to use
the IP address. This setting is especially useful on campuses or other environments where
users change frequently.
IP Address Reservation