User's Manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. Setup
- 4.PC Configuration
- 5. Operation and Status
- 6. Advanced Features
- 7. Advanced Configuration
- Appendix A Troubleshooting
- Appendix B About Wireless LANs
- Appendix C Specifications
Advanced Features
was not allocated to you. You need to connect to
www.dyndns.org and correct this problem.
6.8 Upgrade Firmware
The firmware (software) in the Wireless Router can be upgraded using your Web Browser.
You must first download the upgrade file, and then select Upgrade on the Advanced menu.
You will see a screen like the following.
Figure 41: Upgrade Firmware Screen
To perform the Firmware Upgrade:
1. Click the "Browse" button and navigate to the location of the upgrade file.
2. Select the upgrade file. Its name will appear in the Upgrade File field.
3. Click the "Start Upgrade" button to commence the firmware upgrade.
67
The Wireless Router is unavailable during the up-
grade process, and must restart when the upgrade is
completed. Any connections to or through the Wire-
less Router will be lost.