User Manual

WX-5525R Dual Band AP Router
Wireless Broadband Anywhere
21
particular receiving station and negotiates the sending of a data frame.
After receiving an RTS, the wireless station responds with a Clear to
Send (CTS) frame to acknowledge the right to begin transmission. The
RTS Threshold value should remain at its default value of 2347.
Fragmentation Threshold: This value specifies the maximum size for a packet before
data is fragmented into multiple packets. If you experience a high packet
error rate, you may slightly increase the Fragmentation Threshold.
Setting the Fragmentation Threshold too low may result in poor network
performance. Only minor modifications of this value are recommended.
In most cases, it should remain at its default value of 2346.
Transmission Rate: The rate of data transmission should be set depending on the speed of
your wireless network. You can select from a range of transmission
speeds, or you can select Auto to have the Router automatically use the
fastest possible data rate and enable the Auto-Fallback feature. Auto-
Fallback will negotiate the best possible connection speed between the
Router and a wireless client. The default setting is Auto.
Filters
The Filters screen allows you to block specific internal users from accessing the Internet.
You can set up filters by using MAC addresses, IP addresses, or network port numbers (or
a range of ports).