User Manual

P380 Users guide
8
Starting Up
To setup P380 for the first time can be performed through a web browser on a computer
connected to the local network. The administrator can use one of standard browsers
available (e.g., Netscape Navigator, or Microsoft Internet Explorer versions 4.0 or later).
Once the setup process is completed, P380 can be managed from any computer on the
network that has a web browser.
The steps to setup P380 using a web browser are listed below:
1. Launch a standard web browser on a computer connected to the network.
2. Enter the P380 IP address given to you from the ISP into the URL field of your web
browser (the default setting is 192.168.2.2). P380 device provides SSL (Secure
Sockets Layer) feature, so use https://192.168.2.2 to connect.
If local network settings were configured correctly, then a login screen should appear:
Input the username (the default username is “root”) and correct password (the default
password is “pass”) and click the “OK ” button to pass the security control screen. Once
the correct username and password combination is entered, a P380 welcome screen
should appear as below: